For the fourth year, we are collaborating with the ALiEM Faculty Incubator Program to serialize another volume of Educational Theory made Practical. The Faculty Incubator program a year-long professional development program for educators, which enrolls members into a small, 30-person, mentored digital community of practice (you can learn more here); and, as part of the program, teams of 2-3 participants author a primer on a key education theory, practically linking the abstract to practical scenarios.
They have published their first and second e-book compendium of this blog series and you can find the Volume 3 posts here (the e-book is in progress!) As with the previous iterations, final versions of each primer will be complied into a free eBook to be shared with the health professions education community.
Your Mission if you Choose to Accept it:
The ALiEM Faculty Incubator Program would like to invite you to peer review each post. Using your comments, they will refine each primer. No suggestion is too big or small – they want to know what was missed or misrepresented. Whether you notice a spelling or grammatical mistake, or want to suggest a preferred case scenario that better demonstrates the theory, they welcome all feedback! (Note: The blog posts themselves will remain unchanged.)
Scroll down for the first post of Volume 4!
Cognitive Load Theory
Authors: Sonia Twigg (@lankytwig); Andy Little (@andyglittle); Moises Gallegos (@moyinscrubs)
Main Authors or Originators: John Sweller “Cognitive Load During Problem Solving: Effects on Learning.”
Other important authors or works:
Van Merrienboer JJ and Sweller J. Cognitive load theory in health professions education: design principles and strategies. Medical Education (2010)44: 85-93
Sewell JL, Maggio L, ten Cate O et al. Cognitive Load theory for training health professionals in the workplace: A BEME review of studies among diverse profession: BEME guide No. 53. Medical Teacher (2019) 41(3): 256-270
Young JQ, Van Merrienboer J, Durning S et al. Cognitive load theory: implications for medical education: AMEE Guide No. 86. Medical Teacher (2014) 36: 371-384.
Part 1: The Hook
It’s a night shift in your busy ED. The ED is pumping and Sarah, a senior resident, is running the pod. She has seen sick patient after sick patient and knows there are still long waits for patients in the waiting room. She is going as fast as she can and juggling as many patients as possible. She is seeing Mr. Smith, her fifth patient with chest pain this shift. Mr Smith is in his 60s and has a typical presentation for ischemic chest pain: heavy central chest pressure for the past 30 minutes. He is hemodynamically stable and his pain is improved after aspirin and sublingual nitro. His ECG shows ST depressions in V1-V3. Sarah makes sure she follows the hospital’s chest pain protocol including orders for serial troponins and ECGs, as well as sublingual nitro as needed. She expects Mr Smith has had a NSTEMI. Another critical patient arrives, so she drops what she is doing to go and care for that patient.
30 minutes later she is called to Mr. Smith’s bedside by his nurse who is concerned that he is looking worse. Mr. Smith is diaphoretic, tachycardic, and has become hypotensive. Reviewing the initial ECG, her attending points out that the ST depressions in the anterior leads are concerning for a posterior STEMI. The attending orders a posterior lead ECG which demonstrates ST elevations in V7-V9, confirming her suspicion.
Sarah is upset about this missed diagnosis and the delay in care that it created. She wonders if she would have been able to arrive at the diagnosis if she had not been distracted by her other patients and frequent requests by nurses for medications and disposition plans.
Part 2: The Meat
In a series of papers during the 1980s, Sweller1 began to outline his observations that a high cognitive load negatively impacts learning.
“Cognitive load” is composed of intrinsic load, extraneous load, and germane load.
- Intrinsic load refers to the demand created by the complexity of the task itself, taking into account the performer’s experience.
- Extraneous load refers to demand created by stimuli that are present but not related to the task itself, i.e. distractions.
- Germane load refers to the demand that results from efforts to link working-memory with long-term memory.
Germane load can be thought of as the process of learning. If the intrinsic and extraneous load are too great, we become cognitively overloaded and have little to no capacity for germane load – we can’t learn!
Cognitive Load Theory (CLT) suggests we should design education and performance systems that2:
- match intrinsic load to the knowledge and experience of the learner. (We don’t want our novice learners overwhelmed, and we don’t want our advanced learners bored.)
- minimise extraneous load.
- optimise germane load.
Cognitive Load Theory builds on Atkinson and Shiffrin’s model for human memory3. Sensory inputs enter into our working memory, and we organize (“chunk”) this information into “schemas” that are then stored in long term memory. Working memory is limited. At any given time we can hold 7+/- 2 items in our working memory for only 30 seconds. Long term memory is infinite, but we have to retrieve the schemas back into working memory when we need them. Working memory becomes the bottleneck for learning. Over time, and with repeated experiences, specific schemas become more complex, organized and eventually automated — this is expertise4. A single schema, however complex, counts as one item in working memory. The premise of CLT is that the processes of learning may be different from the processes required to complete a task. If working memory is spent on tasks that do not contribute to the development of schemas from working memory to long-term memory, learning cannot occur.
Intrinsic load describes the cognitive demand of the task itself2. Intrinsic load is affected by task complexity and the prior knowledge of the learner. Complex tasks, with a high number of elements or highly interactive elements, impose a higher intrinsic load than simple tasks3. Let’s use the example of analyzing an ECG. Rare or subtle ECG findings are harder to pick up than obvious ones. Novice learners experience a higher intrinsic load than experienced learners doing the same task. An experienced senior resident would be expected to analyze the same ECG faster and more accurately than a medical student.
Extraneous load is the extra information we experience that is not necessary to complete the task yet uses up part of our precious working memory2. It’s what gets in the way of doing the task: the buzzer that goes off while you are reading the ECG, the interruption by a nurse with a question, the poor print out, and the time pressure of the busy ED. Each of these work to increase your cognitive load and make reading the ECG harder. But it’s not always bad! Sometimes the extra information helps you elaborate the schema. For example a quick review of STEMI mimics from an online reference before reading the ECG may help you make the correct interpretation of the ECG.
Germane load describes the effort associated with learn. It is the load we experience from processing the information in our working memory into (or out of) the schemas we store in long term memory3. It is closely linked with intrinsic load, but relates more to the attention devoted to learning rather than the effort dedicated to actually performing the task (i.e. intrinsic load).
Modern takes or advances
In 2010 Van Merrienboer and Sweller offered principles to guide instructional design in medical education4. Fraser et al5 elaborate on them in their 2015 review of how CLT applies to healthcare simulation.
Strategies to manage intrinsic load:
- Sequencing effect: present simple concepts first followed by more complex ones.
- Segmenting effect: divide a task into manageable “chunks” and once schemas have been formed for each, combine them to perform the whole task (i.e. create one schema).
- Pre-training effect: teach components of a task before the whole task. For example in a healthcare simulation, do a pre-brief on how the mannequin and simulation monitors work.
- Low to High Fidelity effect: start with a low fidelity environment and build up.
Strategies to decrease extraneous load;
- Goal free effect: specify tasks without a single answer, e.g. rather than asking “What is this patient’s diagnosis?” one should ask “List as many differential diagnoses you can for this presentation.”
- Worked example effect: Demonstrate to the learner how to perform a task.
- Completion effect: offer partially completed tasks, e.g. “Please finish this management plan.”
- Split attention effect: don’t split the learner’s attention, e.g. a “just in time training session” means learning and practice are not split in time and space.
- Modality effect: use both visual and auditory modes when presenting information.
- Redundancy effect: don’t give redundant info. Replace multiple sources with a single source of information.
Strategies to optimize germane load:
- Variability in practice effect: offer tasks that provide variation on a theme, e.g. read many different types of ECGs.
- Contextual interference effect: give a series of tasks that use different skills (high contextual interference).
- Self-explanation effect: prompt the learner to “self-explain”, e.g. “Write down why you came to this diagnosis.”
Leppink describes 3 dimensions that help guide instructional design6:
- Task fidelity
- Task complexity
- Instructional support
He recommends that fidelity and complexity should be gradually increased while ensuring adequate instructional support, and then ultimately fade the instructional support when it is no longer needed.
These principles help explain the “expertise-reversal effect”. As the learner becomes more advanced, techniques that previously augmented learning for the novice actually start to interfere. For example, asking an expert to use an unfamiliar mnemonic for a task they already do well provides too much instructional support which increases extraneous load.
A fundamental characteristic of health professions is the collaborative nature of care. Research has begun to explore the application of CLT to group-based learning and teamwork. Kirschner et al have promoted the “interaction hypothesis” to explain the differences in learning efficiency for groups and individuals.7,8 They discuss the impact of utilizing a combined, or collective, working-memory, in the development of schema. In a group setting, cognitive load can be distributed to the working memory of various team members for processing. Large quantities of information are serially distilled into workable inputs that team members can then use to form schema. This can be useful when dealing with high complexity tasks that would otherwise overload an individual. However, with low complexity tasks, distribution of cognitive load may leave individuals without enough effortful processing of information to allow for appropriate schema development. It becomes “a trade-off between the group’s advantage of dividing information processing amongst the collective working memories of the group members and its disadvantage in terms of associated costs of information communication and action coordination.”7
Fraser et al have begun to look at how emotion affects cognitive load.5 They point out that the activation of emotion is inevitable in healthcare simulation, among other situations in medicine. Emotion can increase extraneous load, but it is sometimes an important component of intrinsic load, e.g. when learning to break bad news. Positive emotions appear to improve learning, perhaps through improving motivation and attention or through improving problem solving and creativity. Stress appears to have varying effects; it can focus attention and improve schema formation for the task at hand, but it also decreases working memory and can impair retrieval from long term memory. Healthcare teams have been shown to increase performance when feeling psychologically safe, so if psychological safety is present, “academic emotions,” such as performance anxiety and motivation to learn, can be optimized.
Other examples of where this theory might apply in both the classroom & clinical setting
The argument can be made that the Flipped Classroom model for teaching benefits from application of CLT9 by creating protected learning time through removing it both temporally and spatially from preparatory time. The inherent separation of preparatory work from active application creates a focus on germane load during in-person sessions and off-loads intrinsic and extraneous processes. The design principles proposed by Van Merrienboer and Sweller4 to improve the balance of cognitive load in health professions education can be applied to optimize the preparatory material and in-person sessions that create a flipped learning experience.
Simulation-based learning forms an important tenet of skill development and critical action decision making. However the complexity of cases and skills taught through simulation may result in too high a cognitive load. CLT can be applied to simulation curricula for improved results.5 While running a simulated pediatric resuscitation, a trainee may become overwhelmed trying to remember medication dosages and lose track of the experiential goals for the session. Providing a Broselow tape, or better yet a confederate such as a pharmacist, would allow the learner to focus on building skills as a team leader.
CLT has been applied to performance in medicine as well as learning. Sewell10 examined cognitive load as it applies to performing a colonoscopy. The same group has also looked at how cognitive load impacts patient handovers.
Annotated Bibliography of Key Papers
Van Merrienboer JJ and Sweller J, Cognitive load theory in health professions education: design principles and strategies. Med Educ (2010) 44: 85-93.4
This paper gives the clearest advice on pragmatic strategies for incorporating CLT into the design of medical education curriculum of all types.
Young JQ, Van Merrienboer J, Durning S et al, Cognitive load theory: implications for medical education: AMEE Guide No. 86. Medical Teacher (2014) 36: 371-384.3
This guide clearly describes CLT in terms of its origins in models of human memory, its relation to other learning theories, and how expertise is developed.
Sewell JL, Maggio L, ten Cate O et al, Cognitive Load theory for training health professionals in the workplace: A BEME review of studies among diverse profession: BEME guide No. 53. Medical Teacher (2019) 41(3): 256-270.2
Sewell et al provide a scoping review of CLT literature. Specifically they discuss practice points for workplace teaching, curricular design, learning environment, and metacognition. They conclude that CLT alone cannot account for the complex environment created by health profession education workplaces and would benefit from integration with other education theories and frameworks.
Kirschner, PA, Sweller J, Kirschner F, Zambrano R, J, From Cognitive Load Theory to Collaborative Cognitive Load Theory. Int J Comp Supported Collab Learn (2018) 13(2): 213-233.11
This paper provides a review of the principles in human cognitive architecture that first led to CLT, how CLT can be applied to instructional design, and how CLT can be combined with the cognitive interdependence principle to create Collaborative Cognitive Load Theory.
De Jong criticized CLT by pointing out that while it describes a cognitive basis for instructional design principles, it is “impossible to falsify” because CLT relies on post-hoc assumptions.12 If the load imposed by the task interferes with our schema construction, we think it’s bad and label it as extraneous load. If it helps us construct schema, then we think it’s good and label it as germane load. In other words, we make the evidence fit the theory.
Perhaps we could justify this labeling if we could directly or accurately measure cognitive load. Current measures include:
- Psychometric testing. Paas developed and validated a single-item scale, which is the most commonly used measure.13 In contrast the NASA-Task Load Index (NASA-TLX) is a multi-item scale.14 Unfortunately these are self reported measures that occur after the task has finished. They may not reflect the load during the task, and they only measure overall cognitive load.
- Secondary task response. The speed and accuracy of performing a secondary task, for example giving a medication order while reading the ECG. While you are concentrating on that complex ECG, you might start mumbling or pausing while giving the medication order.
- Physiologic measures. Heart rate or respiratory rate variability, EEG or EMG monitoring, eye tracking, pupillary diameter, blink frequency, serum adrenaline levels, brain imaging and skin conductance have all been examined and validated. Their supposed advantage is that they can measure cognitive load instantaneously and continuously over time.
- Performance on the task.3 Examining how well is the task performed, e.g. number of errors made during task, can provide insight into how much cognitive load was involved in the performance.
It is arguable whether these are valid or accurate measures. What are they really measuring? While they are general measures of cognitive load, most do not measure its constituent parts of intrinsic, extraneous and germane load. In other words, they can tell us that cognitive load affects performance but not how the different parts interact.
In 2013, Leppink developed a psychometric instrument to differentiate between different types of cognitive load.15 However in a subsequent review, it was noted that some studies did not support the instrument described.6 The authors of the review suggested that we go back to a two factor framework and think of cognitive load as consisting of only intrinsic and extraneous load along with a “subjective judgement of learning.” Young and Sewell disagree and have derived instruments to measure the different types of load in medical settings including colonoscopy10 and patient handovers16. In 2016, Naismith developed the Cognitive Load Component (CLC) psychometric test and compared it with the Paas and NASA TLX tests.17 This interesting but small study showed little agreement on total cognitive load between the three tests. However intrinsic load seemed consistently measured by all three. Intrinsic load on the CLC correlated with the NASA TLX subscales of mental demand and frustration.
CLT makes intuitive sense, but we have more research to do to demonstrate how it applies to instructional design and workplace performance.
Part 3: The Denouement
After her whirlwind shift, Sarah is finally able to catch her breath and reflect on Mr. Smith’s case. Luckily he was taken to the cath lab 20 minutes after discovering the posterior MI where emergent PCI and stenting of a 90% occluded RCA occurred without complications and he was transferred to the CCU in stable condition.
She recognizes that as a senior resident she should be more capable of identifying this common ECG pattern. She plans to spend some time on her day off studying up on ECGs (decrease intrinsic load) and will set a systematic approach for when she is handed ECGs on shift making sure she pauses for each (decrease intrinsic extraneous load).
Don’t miss the second post in the series, coming out Tuesday, January 28, 2020!
PLEASE ADD YOUR PEER REVIEW IN THE COMMENTS SECTION BELOW
1.Sweller J. Cognitive load during problem solving: Effects on learning. Cognitive Science (1988) 12: 257-285.
2. Sewell JL, Maggio L, ten Cate O et al. Cognitive Load theory for training health professionals in the workplace: A BEME review of studies among diverse profession: BEME guide No. 53. Medical Teacher (2019) 41(3): 256-270.
3. Young JQ, Van Merrienboer J, Durning S et al. Cognitive load theory: implications for medical education: AMEE Guide No. 86. Medical Teacher (2014) 36: 371-384.
4. Van Merrienboer JJ and Sweller J. Cognitive load theory in health professions education: design principles and strategies. Med Educ (2010) 44: 85-93.
5. Fraser, KL, Ayres, P, Sweller, J. Cognitive Load Theory for the Design of Medical Simulations. Sim in Healthcare (2015) 10(5), 295-307.
6. Leppink J and Van den Heuvel A. The evolution of cognitive load theory and its application to medical education. Perspect Med Educ (2015) 4: 119-127.
7. Kirschner F, Paas F, Kirschner PA. Individual and group-based learning from complex cognitive tasks: effects on retention and transfer efficiency. Computer Hum Behav (2009) 25: 306-314.
8. Kirschner F, Paas F, Kirschner PA. Task complexity as a driver for collaborative learning efficiency; the collective working-memory effect. Appl Cogn Psych (2011) 25: 615-624.
9. Abeysekera, L and Dawson, P. Motivation and cognitive load in the flipped classroom: definition, rationale and a call for research. Higher Ed Res and Dev (2014) 34(1): 1-14.
10. Sewell JL, Bocardin CK, Young JQ. Measuring cognitive load during procedures skill training with colonoscopy as an exemplar. Med Educ 2016 50: 682-692.
11. Kirschner, PA, Sweller J, Kirschner F, Zambrano RJ. From Cognitive Load Theory to Collaborative Cognitive Load Theory. Int J Comp Supported Collab Learn (2018) 13(2): 213-233.
12.De Jong T. Cognitive load theory, educational research, and instructional design: some food for thought. Instr Sci (2010) 38:105-134.
13.Paas F. Training strategies for attaining transfer of problem-solving skill in statistics: A cognitive-load approach. Journal of Educational Psychology (1992), 84, 429-434.
14.Hart SG, Staveland LE. (1988). “Development of NASA-TLX (Task Load Index): Results of Empirical and Theoretical Research”. In Hancock PA, Meshkati N (eds.). Human Mental Workload. Advances in Psychology. 52. Amsterdam: North Holland. pp. 139–183. doi:10.1016/S0166-4115(08)62386-9. ISBN 978-0-444-70388-0.
15.Leppink J, Paas F, Van der Vleuten C et al. Development of an instrument for measuring different types of cognitive load. Behav Res (2013) 45: 1058-1072.
16.Young JQ and Sewell JL. Applying cognitive load theory to medical education: construct and measurement challenges. Perspect Med Educ (2015) 4: 107-109.
17.Naismith LM, Cheung JJH, Ringsted C and Cavalcanti R. Limitations of subjective cognitive load measures in simulation based procedural training. Med Educ (2015) 49: 805-814.
The views and opinions expressed in this post are those of the author(s) and do not necessarily reflect the official policy or position of The Royal College of Physicians and Surgeons of Canada. For more details on our site disclaimers, please see our ‘About’ page